Posted: October 13, 2017 Filed under: Forklift Maintenance, Forklift Safety, Regulatory | Tags: akron, canton, Citations, forklift maintenance, forklift operator training, forklift safety, forklift service, osha, youngstown
From the OSHA blog:
Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff. One remarkable thing about the list is that it rarely changes.
Year after year, inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline. Consider this list a starting point for workplace safety:
- Fall protection
- Hazard communication
- Respiratory protection
- Powered industrial trucks
- Machine guarding
- Electrical wiring
- Electrical, general requirements
It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and our top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures. Employers must take these issues seriously. We also see far too many workers killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding violations are often the culprit here.
Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse. Respiratory protection is essential for preventing long term and sometimes fatal health problems associated with breathing in asbestos, silica or a host of other toxic substances. But we can see from our list of violations that not nearly enough employers are providing this needed protection and training.
The high number of fatalities associated with forklifts, and high number of violations for powered industrial truck safety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment. Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known. Our list of top violations is far from comprehensive.
OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. And we urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale.
To help them, we have released new recommendations for creating a safety and health program at their workplaces. We have many additional resources, including a wealth of information on our website and our free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.
Learn more about Valley Industrial Trucks’ Forklift Operator Safety Training, and contact us to be sure your operators are trained to properly operate the forklifts you own, under the conditions you operate. Well-trained forklift operators are more productive, less costly and more profitable for your material handling operation.
Well-maintained forklifts are also more productive, safer and have a longer useful life. Find out more about how we can help you keep your forklift fleet operating at peak efficiency and safety at our forklift services page.
Contact us to learn more at 888-375-0829.
Posted: July 21, 2017 Filed under: Materials Handling, News | Tags: akron, canton, Economy, Forklifts, GDP, Industrial Trucks, youngstown
Industrial trucks and forklift sales are directly tied to our economy. When our economy does well, more forklifts are required to move the goods ordered by customers and end-users. Conversely, when a downturn occurs, forklift sales drop, sometimes dramatically as they did with the recession of 2009. What few people understood until now, the economic impact these forklifts make on our economy. Recently the Industrial Truck Association in conjunction with Oxford Economics researched the topic, and below are some of the significant findings.
- Industrial truck manufactures generate 209,600 jobs in the US, directly and indirectly.
- The economic impact of forklift on the US economy is $25.7 billion dollars. Here in Ohio forklifts generate over $2.4 billion dollars to our state economy.
- Over $15 billion of that contribution is a result jobs that support forklift sales and service such as service technicians, the parts that are made and sold and installed on forklifts, training centers etc…
- The Bureau of Labor and Statistic (BLS) estimates that there are about 540,000 industrial truck operators in the US.
- There are over 200,000 forklifts sold annually in the US.
- Over 1 million forklifts are sold around the world each year.
- The industrial truck industry generate about $5.3 billion dollars in state and local taxes. Here in Ohio, state and local taxes are over $179 million dollars.
As you can see, when we sell a forklift we create a lot of work not only here at Valley, but for our customers, their customers and the impact is felt all throughout our state and national economy.
Report – Industrial Trucks Effect on State and National Economics
Posted: June 6, 2017 Filed under: Employee Safety | Tags: Employee Health, employee safety, forklift safety, warehouse safety
The hot summer months are upon us. With increased heat and humidity workers become more susceptible to heat-related illnesses. Workers who are not accustomed to working in the heat can quickly become ill and experience heat stroke, which can lead to serious illness and even death. Since your forklift operators will frequently work outside and on equipment that utilizes internal combustion engine, part of your forklift operator training, should be awareness of heat illness.
There are a few things to keep in mind about heat-related illness and what you can do to help prevent it in your workers.
- Train your employees about the dangers of heat-related illnesses. OSHA has excellent training information and materials to help you relate this information to all of your employees who work in the heat. Part of that training should be to recognize the symptoms of heat-related illnesses and to act upon them immediately. Never brush it off and continue working. The symptoms exist for a reason!
- Understand that all employees are not equally able to resist the heat. Employees should be able to assess their own conditioning and how well they handle heat. Employees who are taking certain prescription medications or have certain chronic illnesses, such as diabetes, need to pay special attention to how they feel while working. Employees who are new to outdoor jobs are often most susceptible to heat-related illnesses. Try to ease them into the normal workload gradually, until you’re confident they are acclimated.
- Provide additional water stations during the hotter months, at more convenient locations, and encourage employees to drink water every 15 minutes or so, based on temperature. Never wait until you are thirsty to start re-hydrating.
- Provide for more frequent breaks. In the long run employees will be more productive in the heat if they are getting proper rest to allow their bodies to cool down while also keeping themselves better hydrated during these breaks.
- Proper ventilation and air movement inside your warehouse or material handling facility is very important in keeping the temperature at safe levels and your workers cool. Ceiling fans, screen doors for warehouse dock doors, and roof vents are great ways to keep your facility comfortable and more productive.
OSHA has provided a wealth of information to help you provide a safe atmosphere to deal with the summer heat. While OSHA does not have a standard pertaining to preventing heat illnesses, it is up to us to be sure we have done everything that we can to help our employees stay safe and avoid heat-related illnesses.
Well-trained and equipped employees are more productive employees. Keeping them safe from the heat during the summer months ensures better productivity for tomorrow and years beyond. But it is ultimately up to us as the employers to be sure our employees are prepared to understand and act accordingly to ensure their own safety.
Posted: May 24, 2017 Filed under: Employee Safety, Forklift Safety, Uncategorized | Tags: akron, canton, Employee Health, employee safety, forklift maintenance, forklift operator training, forklift safety, Forklift Safety Day 2017, youngstown
The Industrial Truck Association has announced it’s second annual Forklift Safety Day, to be held Tuesday, June 13.
While most of you won’t be able to attend, there are things you can do to take advantage of this day to help create awareness about the dangers that forklifts present and how to minimize the potential for accidents that can result in injury or death, damage to your facility, equipment and financial losses.
We’ve compiled a short list of things you can do on June 13th to improve safety on and around your forklifts.
- Make sure all your forklift operators have been trained and that their refresher training is up to date, if applicable or necessary.
- Download our “Forklift Operator Questionnaire” to help you vet new operators about their actual experience and history with forklifts.
- Take time to teach your forklift operators the importance of daily inspections of their forklifts. Daily inspections reduce the risk of equipment failure and catch small problems before they blossom into giant ones. You can find daily forklift inspection sheets on our Training Page for both IC and electric units.
- Download and post our free forklift safety posters that you can find on our Training Page.
- Take some time to gather any staff that operates around forklifts, but not on them, to refresh them about the dangers of this equipment and how to be sure to use safe procedures when they are in an area of your facility where forklifts are being operated.
- Make sure all your forklift’s maintenance is up to date. If you have a Planned Maintenance Agreement, this would be a good time to review it with your service provider to ensure all standard checkpoints as well as unique equipment attachments are being inspected and maintained properly.
- Review any unique “site specific” features your facility may have and be sure your operators are aware of proper handling of equipment while on or around these features (ramps, areas where floors can be slick, floor substrates that vary etc…)
- Make sure that training is part of your company’s orientation for anyone that will or MIGHT operate a forklift. Remember, employees that have not been properly trained aren’t even allowed to sit on and start a forklift, much less move it out of the way of anything.
- Make sure you forklifts have proper safety equipment and that it’s operating properly. Lights, horns, back-up alarms, seat belts, fire extinguishers etc… Check out our Blue Safety Light for pedestrian safety enhancement.
- Make sure you have lock-out kits to ensure that forklifts that do not pass an inspection are locked out immediately until repairs are made.
- Review all your forklifts for possible replacement. Old forklifts, or those that are getting “up there” in hours, might be potential threats. Review safety records and maintenance logs for your equipment. You might find this could be a good time to replace some or even all of your forklifts.-
Our goal is to help you operate safe, efficient and productive forklift equipment. To discuss forklift safety, operator training –or to get a quote on new equipment, please Contact Us or give us a call at 888-375-0829..
Posted: February 13, 2017 Filed under: News, Regulatory, Uncategorized | Tags: akron, canton, CLARK Forklifts, Doosan Forklifts, new forklifts, new lift trucks, ohio, section 179, youngstown
Jan 1, 2017 – Section 179 is still affected by the “Protecting Americans from Tax Hikes Act of 2015” (PATH Act) that was signed into law on 12/18/2015. This bill expanded the Section 179 deduction limit to $500,000, where it will remain for all of 2017. For those interested, you may read the summary from the Ways and Means committee here.
Section 179 Deduction: Until further notice, Section 179 will be permanent at the $500,000 level. Businesses exceeding a total of $2 million of purchases in qualifying equipment have the Section 179 deduction phase-out dollar-for-dollar and completely eliminated above $2.5 million. Additionally, the Section 179 cap will be indexed to inflation in $10,000 increments in future years.
50% Bonus Depreciation will be extended through 2019. Businesses of all sizes will be able to depreciate 50 percent of the cost of equipment acquired and put in service during 2015, 2016 and 2017. Then bonus depreciation will phase down to 40 percent in 2018 and 30 percent in 2019.
IMPORTANT THIS YEAR: Section 179 for Current 2017 Tax Year
Section 179 can provide you with significant tax relief for this 2017 tax year, but equipment and software must be financed and in place by midnight December 31, 2017. Use this 2017 Section 179 Calculator to see how much the Section 179 tax deduction can save your company.
2016 Section 179 Tax Information (Last Year)
The PATH ACT passed in December of 2015 affected 2016 and beyond, making the Section 179 deduction for 2016 $500,000. In addition, the 50% Bonus Depreciation was reinstated.
Click Here for the fully updated Section 179 Calculator for tax year 2016 (Last Year).
Answers to the Three Most Common Section 179 Questions
How Much Can I Save on My Taxes in 2017?
It depends on the amount of qualifying equipment and software that you purchase and put into use. See the handy Section 179 Calculator that’s fully updated for 2017, and includes any/all increases from any future legislation.
What Sort of Equipment Qualifies in 2017?
Most tangible business equipment qualifies. Click here for qualifying property.
When Do I Have to Do This By?
Section 179 for 2017 expires midnight, 12/31/2017. If you wish to deduct the full price of your equipment from your 2017 taxes and take advantage of the new higher deduction limits, it must be purchased and put into service by then.
Many businesses are finding Section 179 Qualified Financing to be an attractive option in 2017, especially since the expected Federal Discount Rate increases don’t leave much time for action. Please apply today.
More Section 179 Deduction Questions Answered
Welcome to Section179.Org, your definitive resource for all things Section 179. We’ve brought together a large amount of information regarding Section 179, and clearly and honestly discuss the various aspects of IRS §179 in plain language. This will allow you to make the best possible financial decisions for your company.
Section 179 can be extremely profitable to you, so it is to your benefit to learn as much as possible. To begin, you may have a lot of questions regarding Section 179 such as:
We’ll answer all of these questions, and make certain that you come away with all of the knowledge you need to make smart business decisions in this 2017 tax year regarding equipment and/or software purchasing and Section 179.
Why? Because if you’ve been thinking about buying or leasing new equipment and/or software, it’s definitely to your advantage to use this excellent tax break.
Successful businesses take advantage of legal tax incentives to help lower their operating costs. The Section 179 Deduction is a tax incentive that is easy to use, and gives businesses an incentive to invest in themselves by adding capital equipment. In short, taking advantage of the Section 179 Deduction will help your business keep more capital, while also getting needed equipment, vehicles, and software.
Free Tools that Make Calculating Section 179 Deductions Simple
Section 179 is really very simple. You buy, finance or lease qualifying equipment and/or software, and then take a full tax deduction on it this year (also, there are a few other things, which we’ll go over, but in a nutshell, that’s the idea). To give you an estimate of how much money you can save, here’s a Section 179 Deduction Calculator to make computing Section 179 deductions simple.
If you use the calculator, take note of the savings on your tax obligation. Many people find that, if they lease or finance their Section 179 qualified equipment, the tax savings actually exceed the first year’s payments on the equipment (making buying equipment profitable for the current tax year). This is perfectly legal, and a good example of the incentive that Section 179 provides small and medium businesses.
Visit our website to learn more about our line-up of new material handling equipment, including:
Valley Industrial Trucks is your source for quality material handling equipment, service, parts and rentals. Visit our website to learn more. Then contact us for a quote at 888-375-0829.
Posted: November 21, 2016 Filed under: Employee Safety, Regulatory, Uncategorized | Tags: akron, canton, Citations, employee safety, Forklift Lockout, forklift safety, osha, OSHA Top Ten, Valley Industrial Trucks, Violation, youngstown
Every October, the Department of Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff.
One remarkable thing about the list is that it rarely changes. Year after year, OSHA inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury.
More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline.
Consider this list a starting point for workplace safety:
- Fall protection
- Hazard communication
- Respiratory protection
- Powered industrial trucks
- Machine guarding
- Electrical wiring
- Electrical, general requirements
It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and OSHA’s top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures.
OSHA says far too many workers are killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding (including lift trucks) violations are often the culprit here. Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse.
The high number of fatalities associated with forklifts, and high number of violations for powered industrial truck safety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment.
Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known.
Their list of top violations is far from comprehensive. OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. They urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale. To help them, OSHA has released new recommendations for creating a safety and health program at their workplaces.
OSHA has many additional resources, including a wealth of information on their website and their free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.
Posted: June 14, 2016 Filed under: Employee Safety, Forklift Safety, Uncategorized | Tags: employee safety, forklift operator training, forklift safety, Forklift Safety Day, Forklift Safety Day 2016
The day is here and companies all around the country are taking time today to bring awareness to the dangers presented by forklifts. We’ve been promoting what you can do to celebrate Forklift Safety Day, and today, our flagship line, CLARK Material Handling is having a celebration at their Lexington, KY headquarters. Below is a summary of the festivities.
Lexington, KY (June 3, 2016) – CLARK Material Handling Company, underscoring its commitment to the safe use of forklifts and importance of operator training, is hosting a community-wide forklift safety awareness event at its Lexington campus on Tuesday, June 14, 2016, in support of the third annual National Forklift Safety Day. The program will run from 11:30AM to 1:30PM and is open to the public. CLARK is located at 700 Enterprise Drive in Lexington, KY at the intersection of New Circle Road and Old Frankfort Pike.
A full schedule of events planned to endorse and promote National Forklift Safety Day include:
- An open house including plant tours at 11:30AM and 12:30PM
- Special Flag Raising Ceremony at 12:00 noon, in honor of Flag Day
- “Lift Truck Rodeo” competition and safety demonstrations
- A display of aftermarket safety products
- The premiere of the new CLARK video, “Forklift Safety: Pre-Shift Inspection”
- Local media coverage including a live radio remote by 98.1 FM ‘The Bull’, WBUL
- Free lunch – prepared by Smokin’ Jax Grill
- Door prizes
In addition to the activities in Lexington, CLARK executives will participate in the Industrial Truck Association (ITA) National Forklift Safety Day events taking place June 14 in Washington, D.C.
“It is vitally important to emphasize the safe use of forklifts and proper operator training,” stated Dennis Lawrence, President and CEO of CLARK. “Forklift safety is not just a one day per year focus. At CLARK, forklift safety is our top priority every day. We are proud to join with the ITA and our fellow forklift manufacturers to raise awareness about the safe use of forklifts and the continual need for operator training.”
In further support of forklift safety, CLARK is offering customer discounts on select safety products purchased during June, 2016. Additionally, CLARK is conducting a lift truck operator instructor training certification course for a number of area companies.
National Forklift Safety Day, sponsored by the Industrial Truck Association, serves as a focal point for manufacturers to highlight the safe use of forklifts and the importance of operator training. This day provides an opportunity for the industry to educate customers, policymakers and the administration on forklift operating safety practices.
Valley Industrial Trucks is your source for quality new forklifts, forklift service, parts, rentals and Forklift operator training. Contact us 888-375-0829 to inquire about any of our products or services.