OSHA Announces Top Ten Cited Categories for FY 2016

From the OSHA blog:

Labor’s Occupational Safety and Health Administration releases a preliminary list of the 10 most frequently cited safety and health violations for the fiscal year, compiled from nearly 32,000 inspections of workplaces by federal OSHA staff. One remarkable thing about the list is that it rarely changes.

Year after year, inspectors see thousands of the same on-the-job hazards, any one of which could result in a fatality or severe injury. More than 4,500 workers are killed on the job every year, and approximately 3 million are injured, despite the fact that by law, employers are responsible for providing safe and healthful workplaces for their workers. If all employers simply corrected the top 10 hazards, we are confident the number of deaths, amputations and hospitalizations would drastically decline. Consider this list a starting point for workplace safety:

  1. Fall protection
  2. Hazard communication
  3. Scaffolds
  4. Respiratory protection
  5. Lockout/tagout
  6. Powered industrial trucks
  7. Ladders
  8. Machine guarding
  9. Electrical wiring
  10. Electrical, general requirements

It’s no coincidence that falls are among the leading causes of worker deaths, particularly in construction, and our top 10 list features lack of fall protection as well as ladder and scaffold safety issues. We know how to protect workers from falls, and have an ongoing campaign to inform employers and workers about these measures. Employers must take these issues seriously. We also see far too many workers killed or gruesomely injured when machinery starts up suddenly while being repaired, or hands and fingers are exposed to moving parts. Lockout/tagout and machine guarding violations are often the culprit here.

Proper lockout/tagout procedures ensure that machines are powered off and can’t be turned on while someone is working on them. And installing guards to keep hands, feet and other appendages away from moving machinery prevents amputations and worse. Respiratory protection is essential for preventing long term and sometimes fatal health problems associated with breathing in asbestos, silica or a host of other toxic substances. But we can see from our list of violations that not nearly enough employers are providing this needed protection and training.

The high number of fatalities associated with forklifts, and high number of violations for powered industrial truck safety, tell us that many workers are not being properly trained to safely drive these kinds of potentially hazardous equipment. Rounding out the top 10 list are violations related to electrical safety, an area where the dangers are well-known. Our list of top violations is far from comprehensive.

OSHA regulations cover a wide range of hazards, all of which imperil worker health and safety. And we urge employers to go beyond the minimal requirements to create a culture of safety at work, which has been shown to reduce costs, raise productivity and improve morale.

To help them, we have released new recommendations for creating a safety and health program at their workplaces. We have many additional resources, including a wealth of information on our website and our free and confidential On-site Consultation Program. But tackling the most common hazards is a good place to start saving workers’ lives and limbs.

Learn more about Valley Industrial Trucks’ Forklift Operator Safety Training, and contact us to be sure your operators are trained to properly operate the forklifts you own, under the conditions you operate. Well-trained forklift operators are more productive, less costly and more profitable for your material handling operation.

Well-maintained forklifts are also more productive, safer and have a longer useful life. Find out more about how we can help you keep your forklift fleet operating at peak efficiency and safety at our forklift services page.

Contact us to learn more at 888-375-0829.

Advertisements

Forklift Safety Day 2017

The Industrial Truck Association has announced it’s second annual Forklift Safety Day, to be held Tuesday, June 13.

While most of you won’t be able to attend, there are things you can do to take advantage of this day to help create awareness about the dangers that forklifts present and how to minimize the potential for accidents that can result in injury or death, damage to your facility, equipment and financial losses.

We’ve compiled a short list of things you can do on June 13th to improve safety on and around your forklifts.

  1. Make sure all your forklift operators have been trained and that their refresher training is up to date, if applicable or necessary.
  2. Download our “Forklift Operator Questionnaire” to help you vet new operators about their actual experience and history with forklifts.
  3. Take time to teach your forklift operators the importance of daily inspections of their forklifts. Daily inspections reduce the risk of equipment failure and catch small problems before they blossom into giant ones. You can find daily forklift inspection sheets on our Training Page for both IC and electric units.
  4. Download and post our free forklift safety posters that you can find on our Training Page.
  5. Take some time to gather any staff that operates around forklifts, but not on them, to refresh them about the dangers of this equipment and how to be sure to use safe procedures when they are in an area of your facility where forklifts are being operated.
  6. Make sure all your forklift’s maintenance is up to date. If you have a Planned Maintenance Agreement, this would be a good time to review it with your service provider to ensure all standard checkpoints as well as unique equipment attachments are being inspected and maintained properly.
  7. Review any unique “site specific” features your facility may have and be sure your operators are aware of proper handling of equipment while on or around these features (ramps, areas where floors can be slick, floor substrates that vary etc…)
  8. Make sure that training is part of your company’s orientation for anyone that will or MIGHT operate a forklift. Remember, employees that have not been properly trained aren’t even allowed to sit on and start a forklift, much less move it out of the way of anything.
  9. Make sure you forklifts have proper safety equipment and that it’s operating properly. Lights, horns, back-up alarms, seat belts, fire extinguishers etc… Check out our Blue Safety Light for pedestrian safety enhancement.
  10. Make sure you have lock-out kits to ensure that forklifts that do not pass an inspection are locked out immediately until repairs are made.
  11. Review all your forklifts for possible replacement. Old forklifts, or those that are getting “up there” in hours, might be potential threats. Review safety records and maintenance logs for your equipment. You might find this could be a good time to replace some or even all of your forklifts.-

Our goal is to help you operate safe, efficient and productive forklift equipment. To discuss forklift safety, operator training –or to get a quote on new equipment, please Contact Us or give us a call at 888-375-0829..


Celebrating Forklift Safety Day 2016

Forklift Safety Day Logo - mdThe Industrial Truck Association has announced it’s second annual Forklift Safety Day, to be held Tuesday, June 14.

While most of you won’t be able to attend, there are things you can do to take advantage of this day to help create awareness about the dangers that forklifts present and how to minimize the potential for accidents that can result in injury or death, damage to your facility, equipment and financial losses.

We’ve compiled a short list of things you can do on June 14th to improve safety on and around your forklifts.

  1. Make sure all your forklift operators have been trained and that their refresher training is up to date, if applicable or necessary.
  2. Download our “Forklift Operator Questionnaire” to help you vet new operators about their actual experience and history with forklifts.
  3. Take time to teach your forklift operators the importance of daily inspections of their forklifts. Daily inspections reduce the risk of equipment failure and catch small problems before they blossom into giant ones. You can find daily forklift inspection sheets on our Training Page for both IC and electric units.
  4. Download and post our free forklift safety posters that you can find on our Training Page.
  5. Take some time to gather any staff that operates around forklifts, but not on them, to refresh them about the dangers of this equipment and how to be sure to use safe procedures when they are in an area of your facility where forklifts are being operated.
  6. Make sure all your forklift’s maintenance is up to date. If you have a Planned Maintenance Agreement, this would be a good time to review it with your service provider to ensure all standard checkpoints as well as unique equipment attachments are being inspected and maintained properly.
  7. Review any unique “site specific” features your facility may have and be sure your operators are aware of proper handling of equipment while on or around these features (ramps, areas where floors can be slick, floor substrates that vary etc…)
  8. Make sure that training is part of your company’s orientation for anyone that will or MIGHT operate a forklift. Remember, employees that have not been properly trained aren’t even allowed to sit on and start a forklift, much less move it out of the way of anything.
  9. Make sure you forklifts have proper safety equipment and that it’s operating properly. Lights, horns, back-up alarms, seat belts, fire extinguishers etc… Check out our Blue Safety Light for pedestrian safety enhancement.
  10. Make sure you have lock-out kits to ensure that forklifts that do not pass an inspection are locked out immediately until repairs are made.
  11. Review all your forklifts for possible replacement. Old forklifts, or those that are getting “up there” in hours, might be potential threats. Review safety records and maintenance logs for your equipment. You might find this could be a good time to replace some or even all of your forklifts.-

Our goal is to help you operate safe, efficient and productive forklift equipment. To discuss forklift safety, operator training –or to get a quote on new equipment, please Contact Us or give us a call at 888-375-0829..


To Do a BIG Job, You Need a BIG Forklift

When one of our great customers, Mercer Forge needed a BIG, reliable forklift to handle the 10 ton plus steel pipes and bars; then turned to us for a piece of equipment that would do the job, reliably and within their budget. We recommended the Doosan D140S-7. The Doosan D140S-7 heavy-duty forklift is powered by Doosan’s 5.9 liter diesel engine featuring intercooled turbocharging that generates over 158hp.

Doosan Forklift

The cab and seat are heated to provide comfort when working outdoors during our region’s coldest winter months. It also features a stereo with bluetooth connectivity. To retrieve and deposit these big loads, it has 96″ forks, 144″ two-stage mast and sideshifting fork positioners.

When it comes to forklifts that will handle the largest loads, all day, every day, you can count on Doosan and Valley Industrial Trucks to get you the right forklift for the job you need done, and keep it operating at maximum productivity with our planned maintenance programs.

Check out our Doosan Forklift Showroom. When the time comes for a durable and reliable forklift and forklift service company, Contact Us, or give your local Valley Industrial Trucks branch a call. We serve northeastern Ohio and Western Pennsylvania from our convenient Youngstown and Akron facilities.


Five Things Your Forklift Might Tell You, if They Could Talk

Talking ForkliftEach day, your forklift bears the brunt of your material handling operation. It works hard for you day after day, rarelycomplaining about the workload or its surroundings. Occasionally it tells you something is wrong, by breaking down. But waiting for a breakdown is expensive. Repairs are more costly once a breakdown occurs and breakdowns can create dangerous situations at your facility. Have you ever wondered what a forklift might tell you, if it could talk? We did, and came up with the following:

  1. “I’m not getting inspected frequently enough.”  Although OSHA requires pre-shift inspections, few companies require them. Pre-shift inspections ensure that if I get sick, you catch it quickly, before it becomes a dangerous and costly situation. You can find forms to help my operators inspect me on Valley Industrial Trucks’s forklift safety page.
  2. “I think my operators need more training.” They jerk me from forward to reverse, to forward again, putting a strain on my transmission. They don’t slow down at intersections or use my safety features as frequently as they should. My horn is rarely used, I don’t have any strobe lights and I’m afraid I might end up in an accident. I don’t want to get hurt and I sure don’t want to hurt anyone else. I think we need some additional operator training.
  3. “My co-workers need more attention.” You put all of us on the same service cycles. The other guys work harder, lift more weight, more frequently and need to be seen by your forklift service pros more often. Give them a call.
  4. “My feet hurt.” These tires are old, they have chunks missing, they’re worn and at the end of the day, I can’t wait to stop and give them a break. Worn and damaged tires use more fuel, make my operator more fatigued and create a dangerous work environment. When’s the last time you inspected my tires carefully?
  5. “I’m shocked at how my electric friends are being treated.” I run on gas, but my electric friends are always complaining about their batteries, that the water levels aren’t inspected enough and they get hot all too often. They also complain about how they get charged at weird times and it doesn’t feel good. Maybe you should talk to their operators about how they use their electric forklifts. I’m told batteries are really expensive and making them last as long as possible is best for everyone.

Have you ever wondered what else your forklifts might tell you, if they could talk? Our team of service professionals can share their experience with you to determine the best plan to keep all your forklifts operating at peak efficiency and productivity. Happy and healthy forklifts are more productive and safer for those on them, and around them. Contact Us to speak to a service professional today. Next time you talk to your forklift, you’ll get nothing but “thank you’s” and compliments!


3 Tips to Forklift Fleet Maintenance Optimization

In recent forklift fleet maintenance and management articles, we have discussed the benefits of properly maintaining your equipment. There is no doubt that companies that engage in robust and comprehensive equipment maintenance save money in the long run and improve the efficiency of their forklift fleets.

Establishing a program that proactively maintains your equipment to maximize productivity takes just a bit of work. But with the right partner by your side, the process can be much easier to set up and manage. Following are three tips we suggest in order to establish programs that maximize productivity and reduce your overall costs.

Fleet Analysis

We observe, most of the time, that all equipment in your facility are not utilized the same way or under the same conditions. Some equipment might sit idle for a few hours each day and lift/transport far less overall weight. We suggest not only analyzing the hours each piece of equipment is used, but also how it is used. A piece of equipment used outdoors will required more attention than the same piece of equipment used indoors in a warehouse setting. Using both quantitative and qualitative information will help you develop a service plan that treats each piece of equipment uniquely and provides for the proper level of maintenance.

Quantitative Information – This would include the number of hours used each year, the average weight of each load hauled, service history, equipment age and any other quantitative information available through any type of fleet management software you may use.

Qualitative Information – This information is usually observation-oriented and includes the type of conditions under which each forklift operates, and the training or experience level of the operator. This observation would also include the types of loads each piece of equipment hauls. Hauling seafood off the dock versus processing retail-ready seafood, for example, will result in two very different wear-and-tear scenarios.

Daily Inspections

Although they are required by OSHA, we have found that most companies do not perform pre-shift inspections.  And we can’t tell you how many times we’ve gotten a call from a customer who has had to lock out a unit as a result of a pre-shift inspection because the unit is not fit for operation.

Pre-shift inspections will results in catching small maintenance issues before they blossom into giant repair headaches and dangerous scenarios.  Performing inspections also reduces your liability should an accident occur during a shift. Being able to provide a recent and thorough inspection prior to operating the equipment will help your cause dramatically, should litigation occur.

You can find pre-shift inspection forms on our website HERE.

Partner Selection

Having a service partner who has the experience, skills and trained repair staff to work with you is a major key to a successful program. Not all service providers are created equal; selecting one based on price could result in spending more without reaping the benefits. Instead, select a partner that has demonstrated to you that they understand your equipment, your operation and have the trained staff to execute your service plan. Doing so will give you the desired outcome for your operation. To help ascertain the ability of your potential service partner, inquire about the following:

  • Training that the service technicians receive (formal and informal)
  • Experience level of service staff (including technicians)
  • Level of experience in servicing your type of equipment
  • References from other clients that utilized similar equipment under similar operating conditions
  • Visit their facility to see how it operates. You can pick up pretty quickly whether the facility is organized and professionally represented.

Taking the time to establish a comprehensive service program takes a bit more work up-front, but in the long run it pays for itself many times over. To discuss your service program with our trained staff of service professionals, please contact us, or call us at 888-375-0829.


A Good Reason to Conduct Inspections Other than…”It’s the Law”

Although OSHA requires a pre-shift operational inspection of each piece of forklift equipment, we have found that many companies do not perform them. This practice exposes companies to fines should an OSHA inspection take place. It also puts your company at risk of liability should an accident take place due to a faulty piece of equipment. These two reasons alone should cause most to re-think their pre-shift inspection policy. We suggest a third, very important reason to conduct pre-shift inspections. Catching small maintenance issues is far more cost effective than letting them blossom into giant repair headaches.

Now, don’t get us wrong. We won’t turn down big shop jobs that cost thousands of dollars and were more than ready to perform them for anyone that contacts us. The facts are we have heard many times form clients who conduct regular inspections about damaged hydraulic hoses, tires about to come apart, loose fan belts…and other things that are not reported until a failure occurs. As it often can be when these major failures occur we end up picking your truck up and bringing it back to your shop instead of making the smaller repair at your facility that led to a much more expensive failure.

Like any preventative measures, inspections take a little time, but can pay off big in the long run. For more information on pre-shift inspections please visit the OSHA Powered Industrial Truck website. If you need a pre-shift inspection form you can get it free. Click here for Electric Truck Pre-Shift Inspection Form and here for IC Truck Pre-Shift Inspection Form. And remember, if you find anything not operating properly follow OSHA’s requirement by locking the truck out of service and reporting it to maintenance or call us for service at 888-375-0829.